How Y Type Strainer Works

Classification: lndustry News

FONT

Mar 07,2022

Y Type Strainer is an indispensable filter device for the pipeline system conveying medium. Y Type Strainer is usually installed at the inlet end of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment to remove impurities in the medium, so as to remove the impurities in the medium. Protect the normal use of valves and equipment. Y Type Strainer has the features of advanced structure, low resistance and convenient sewage discharge.

good price and quality Y Type Strainer
How the Y Type Strainer works:
Y Type Strainer is a small device that removes a small amount of solid particles in the liquid, which can protect the normal operation of the device. When the fluid enters the filter cartridge with a certain size filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. , When cleaning is required, just take out the detachable filter cartridge and reload it after processing, so it is extremely convenient to use and maintain. Y Type Strainer, also known as decontamination device and filter valve, is an indispensable device in the pipeline system for conveying the medium. Its function is to filter the mechanical impurities in the medium, which can remove the rust, sand particles in the sewage and a small amount of solid particles in the liquid. To protect the fittings on the equipment pipeline from wear and blockage, it can protect the normal operation of the equipment.
Y Type Strainer is Y-shaped, one end is to let water and other fluids pass through, and the other end is to precipitate waste and impurities. Usually it is installed at the inlet end of pressure reducing valve, pressure relief valve, water level valve or other equipment. Y Type Strainer The function of the Strainer is to remove impurities in the water to protect the normal operation of valves and equipment. The water to be treated by the filter enters the body from the water inlet, and the impurities in the water are deposited on the stainless steel filter screen, resulting in a pressure difference. The pressure difference between the inlet and outlet is monitored by the differential pressure switch. When the pressure difference reaches the set value, the electric controller sends a signal to the hydraulic control valve and drives the motor, which triggers the following actions: the motor drives the brush to rotate, cleans the filter element, and opens the control valve at the same time. For sewage discharge, the entire cleaning process only lasts for tens of seconds. When the cleaning is over, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the next filtration process begins. After the Y Type Strainer equipment is installed, the technicians will debug it, set the filtration time and the cleaning conversion time, the water to be treated enters the body from the water inlet, and the filter starts to work normally.

Key words: Low,price,Y,Type,Strainer,Y,Type,Strainer,supplier(s),china

Previous:

Three maintenance suggestions for Cf8-cf8m Stainless Steel Gate Valve products

Next:

What is the type of Silent Check Valve

Related Posts

knowledge

Company News

lndustry News

Exhibition

Contact Us

E-mail:
sales@crvalve.com

Tel:
+86-371-68139136

Address: No.5 Wanquanhe Road, Shangjie District, Zhengzhou City, China

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

Submit
%{tishi_zhanwei}%