Features of Tilting Disc Check Valve

Classification: lndustry News

FONT

Sep 07,2021

Tilting Disc Check Valve has the disadvantage of high cost, and it is more difficult to repair than swing check valves. Therefore, Tilting Disc Check Valve is usually limited to occasions where the swing check valve cannot meet the requirements.

quality Tilting Disc Check Valve supplier(s) china
Tilting Disc Check Valve features:
1. The impact of the check valve is caused by the disc of the valve not reaching the closed position before the fluid flows back. Tilting Disc Check Valve can close quickly because the disc has a short running distance, so it can quickly reach the valve seat position, thereby minimizing the impact.
2. Tilting Disc Check Valve is suitable for preventing backflow of fluid in horizontal or vertical pipelines. In vertical pipelines, or pipelines with any inclination angle between horizontal and vertical, these check valves are only suitable for pipelines where the medium flows upward.
3. Tilting Disc Check Valve operates automatically. It opens under the pressure of the fluid flow rate and closes under the action of gravity. The seat seal load and tightness are related to the back pressure. If the flow rate pressure is not enough to support the valve in an open, stable position, the disc and other moving parts will continue to vibrate.
In order to avoid premature wear, noise or vibration of moving parts, it is necessary to select the diameter of the check valve according to the fluid state.
When installing Tilting Disc Check Valve, it may be necessary to install a reducer. The resulting pressure drop should not be greater than those valves with a larger diameter in a partially opened state, which will greatly extend the service life of the valve, and can also bring additional benefits, that is, the valve has a smaller diameter and relatively lower cost.

Key words: good,price,and,quality,Tilting,Disc,Check,Valve,products,customized,Tilting,Disc,Check,Valve,supplier(s),china

Previous:

Double Offset Butterfly Valve

Next:

The structure principle of Tilting Disc Check Valve

Related Posts

knowledge

Company News

lndustry News

Exhibition

Contact Us

E-mail:
sales@crvalve.com

Tel:
+86-371-68139136

Address: No.5 Wanquanhe Road, Shangjie District, Zhengzhou City, China

Get A Quote

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

Submit
%{tishi_zhanwei}%